AirLink Wireless N 300 Ethernet Adapter Uživatelský manuál stáhnout pdf (Strana 29)



Here are descriptions of every setup item:

Band Please select the wireless band you wish to use. By selecting

different band setting, you’ll be able to allow or deny the wireless

client of a certain band.

If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz (G), only wireless

clients using the wireless band you select (802.11b, 802.11 Draft-N,

or 802.11g) will be able to connect to this access point.

If you select 2.4GHz (B+G), then only wireless clients using 802.11b

and 802.11g band will be able to connect to this access point.

If you want to allow 802.11b, 802.11g, and 802.11 Draft-N clients to

connect to this access point, select 2.4GHz (B+G+N).

Channel

Number

Please select a channel number you wish to use. The channel

number must be same with another wireless access point you wish to

connect.

MAC address 1~4 Please input the MAC address of the wireless access point you wish

to connect.

Set Security Click this button to select an encryption mode for this wireless link, a

new popup window will appear. Please refer to Section 2-7 for

detailed descriptions.

After you finish with setting, please click ‘Apply’, and the following message will be displayed:

After you clicked Apply, the following message will be displayed on your web browser:

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 55 56

Žádné komentáře

AirLink Wireless N 300 Ethernet Adapter Uživatelský manuál Strana 29